DRIVES AND MOTOR BEHAVIOR / UNDERSTAND. APPLY. VERIFY.

DRIVES AND MOTOR BEHAVIOR / ENGINEERING LEARNING

VFD & Motor Control Systems

Understand speed, torque and protection before operation.

Suggested duration: 45 hours.

Explore AC/DC motors, three-phase systems, induction motor characteristics and starter methods. Configure VFD concepts, speed and torque references, protection and control interfaces, integrate PLC commands and feedback, and troubleshoot motor/drive scenarios with final practical assessment and viva.

Starting level, batch dates, software and equipment are confirmed through counselling. See fees and batch timings below. An enquiry is not a confirmed booking.

A variable-frequency drive concept sends signals to a rotating motor model beside a speed-ramp chart. This is not a live motor or wiring demonstration. This is a conceptual animation, not a functional simulation or wiring guide. THE DRIVE-AND-MOTOR DYNAMICS LAB VFD / DRIVE PARAMETER REVIEW ACCELERATE / HOLD / DECELERATE DRIVE COMMANDRAMP / FREQUENCYMOTOR RESPONSE

PLAN AHEAD

Clear fees.
Flexible batches.

Course fee / 45 hours₹9,999 + 18% tax

Total including tax₹11,798.82

Batch options

Regular, weekend and Sunday batches available. Monday–Saturday: preferred slots 9am–6pm; Sunday: 10am–1pm (IST). Slots, dates and places require availability confirmation.

Fees exclude 18% tax; totals include tax. Confirm material, licence and take-home kit charges before enrolment. Enquiry is not a reservation.

Learning pathway
Drives and motor behavior
Suggested duration
45 hours
Curriculum
10 topics / modules
Availability
Confirm by enquiry

VFD & MOTOR CONTROL SYSTEMS / AT A GLANCE

A clear learning scope.
Practical work with context.

10

Detailed curriculum topics

Explore the supplied drives and motor behavior learning sequence.

45

Suggested learning hours

Session frequency and calendar duration are confirmed by enquiry.

3

Practical review stages

Speed profiles, protection and PLC integration organize 42 exercises within the topic hours.

01 / COURSE PERSPECTIVE

Understand the system.
Understand speed, torque and protection before operation.

Starting point

Suggested preparation: electrical fundamentals, motor concepts and control wiring. Live three-phase work requires qualified supervision.

Discuss preparation and readiness with a mentor before choosing a batch. These are recommended starting points, not a guarantee of placement.

Evidence of learning

Interpret motor nameplates and three-phase concepts, explain induction motor characteristics and starters, configure VFD parameters and speed/torque references, review protection and wiring, integrate PLC commands and fault feedback, and diagnose training scenarios with final practical assessment and viva.

Project scope depends on supervision, equipment and practice. Examples describe learning activities, not verified student work or guaranteed outcomes.

02 / WHAT YOU WILL WORK ON

Build understanding.
Make your choices explainable.

Read motor fundamentals

Compare motor types and relate the training scenario to three-phase and induction-motor concepts.

Explain drive parameters

Connect frequency, acceleration and protection settings with the manufacturer's documented limits.

Troubleshoot systematically

Use simulated states or supervised measurements to distinguish a command issue from a drive or motor fault.

03 / CURRICULUM & PRACTICE

Complete topic-wise syllabus.
45 hours of motors & drives.

Ten topics total 45 hours. All 42 practical exercises are integrated into topic allocations; Topic 10 includes final practical assessment and viva. Exercises involving three-phase supplies, starters, insulation tests, drive wiring and operation use simulation or qualified supervised demonstrations on approved trainers, not unsupervised live work. Confirm equipment, ratings, supported control modes and manufacturer procedures.

TOPIC 01AC and DC Motor Fundamentals4 HOURS

Topic 1: AC and DC Motor Fundamentals (4 Hours)

  • Introduction to Electrical Motors
  • Fundamentals of Electromagnetism
  • Working Principles of Electric Motors
  • AC Motor Fundamentals
  • DC Motor Fundamentals
  • Construction of AC and DC Motors
  • Stator and Rotor Components
  • Types of AC Motors
  • Types of DC Motors
  • Brushed and Brushless DC Motors
  • Synchronous and Asynchronous Motors
  • Motor Ratings and Nameplate Specifications
  • Voltage, Current, Power and Frequency
  • Motor Efficiency and Power Factor
  • Industrial Motor Applications

Practical exercises

  • Identify different motor types.
  • Study motor nameplate details.
  • Measure motor voltage and current.
  • Demonstrate basic motor operation.
TOPIC 02Three-Phase Electrical Systems4 HOURS

Topic 2: Three-Phase Electrical Systems (4 Hours)

  • Introduction to Three-Phase Power Systems
  • Single-Phase vs Three-Phase Supply
  • Three-Phase Voltage and Current
  • Phase Sequence and Phase Rotation
  • Star (Wye) Connection
  • Delta Connection
  • Line Voltage and Phase Voltage
  • Line Current and Phase Current
  • Three-Phase Power Calculations
  • Active, Reactive and Apparent Power
  • Power Factor Fundamentals
  • Three-Phase Electrical Distribution
  • Neutral and Earthing Systems
  • Phase Failure and Voltage Imbalance
  • Electrical Safety and Protection

Practical exercises

  • Identify three-phase supply terminals.
  • Demonstrate star and delta connections.
  • Measure three-phase voltage.
  • Check phase sequence using a phase sequence meter.
TOPIC 03Induction Motors & Motor Characteristics5 HOURS

Topic 3: Induction Motors & Motor Characteristics (5 Hours)

  • Introduction to Three-Phase Induction Motors
  • Working Principle of Induction Motors
  • Squirrel Cage Induction Motors
  • Slip Ring Induction Motors
  • Stator and Rotor Construction
  • Rotating Magnetic Field
  • Synchronous Speed
  • Rotor Speed and Slip
  • Torque-Speed Characteristics
  • Starting Current and Running Current
  • Motor Efficiency
  • Motor Power Ratings
  • Motor Nameplate Interpretation
  • Motor Duty Classification
  • Industrial Motor Selection
  • Applications in Pumps, Fans, Compressors and Conveyors

Practical exercises

  • Identify motor terminals.
  • Study induction motor nameplates.
  • Observe motor starting and running characteristics.
  • Measure operating current.
TOPIC 04Motor Starters & Starting Methods5 HOURS

Topic 4: Motor Starters & Starting Methods (5 Hours)

  • Introduction to Motor Starting Methods
  • Direct-On-Line (DOL) Starter
  • Star-Delta Starter
  • Forward and Reverse Motor Starters
  • Auto Transformer Starter Fundamentals
  • Soft Starter Fundamentals
  • Motor Starting Current
  • Contactor and Relay Operations
  • Thermal Overload Relay
  • Auxiliary Contacts
  • Electrical Interlocking
  • Mechanical Interlocking
  • Control and Power Circuit Diagrams
  • Motor Start-Stop Control
  • Emergency Stop Circuits
  • Industrial Starter Panel Configuration

Practical exercises

  • DOL starter wiring.
  • Forward-reverse motor control.
  • Star-delta starter demonstration.
  • Overload relay configuration.
  • Start-stop push-button control.
TOPIC 05Variable Frequency Drives (VFD)7 HOURS

Topic 5: Variable Frequency Drives (VFD) (7 Hours)

  • Introduction to Variable Frequency Drives
  • Working Principle of VFDs
  • VFD Architecture and Functional Blocks
  • Rectifier Section
  • DC Bus and Capacitor Section
  • Inverter Section
  • IGBT Fundamentals
  • Pulse Width Modulation (PWM)
  • Frequency and Voltage Control
  • VFD Input and Output Terminals
  • VFD Power Wiring
  • VFD Control Wiring
  • VFD Parameter Configuration
  • Motor Nameplate Parameter Entry
  • Acceleration and Deceleration Time
  • Minimum and Maximum Frequency
  • Forward and Reverse Direction Control
  • Local and Remote Operating Modes
  • VFD Digital and Analog Inputs
  • VFD Fault Codes and Status Monitoring
  • VFD Installation and Commissioning

Practical exercises

  • Configure a VFD.
  • Connect a three-phase motor to a VFD.
  • Set frequency and acceleration parameters.
  • Perform forward and reverse control.
  • Monitor drive status and fault conditions.
TOPIC 06Motor Speed & Torque Control4 HOURS

Topic 6: Motor Speed & Torque Control (4 Hours)

  • Introduction to Motor Speed Control
  • Relationship Between Frequency and Motor Speed
  • Synchronous Speed Calculation
  • Voltage-to-Frequency (V/f) Control
  • Constant Torque and Variable Torque Applications
  • Speed Reference Configuration
  • Analog Speed Control
  • Potentiometer-Based Speed Control
  • Digital Speed Reference
  • Multi-Speed Operation
  • Torque Fundamentals
  • Torque-Speed Characteristics
  • Introduction to Vector Control
  • Sensorless Vector Control Fundamentals
  • Introduction to Encoder-Based Feedback
  • Motor Braking Fundamentals

Practical exercises

  • Control motor speed through a VFD.
  • Configure analog speed reference.
  • Demonstrate multi-speed operation.
  • Compare motor performance at different frequencies.
TOPIC 07Motor Protection & Safety Systems4 HOURS

Topic 7: Motor Protection & Safety Systems (4 Hours)

  • Introduction to Motor Protection
  • Motor Overload Protection
  • Short-Circuit Protection
  • Overvoltage and Undervoltage Protection
  • Phase Loss Protection
  • Phase Imbalance Protection
  • Earth Fault Protection
  • Thermal Protection
  • Motor Overheating Detection
  • Electronic Motor Protection Relays
  • Circuit Breakers and Fuses
  • Emergency Stop Systems
  • Motor Protection Coordination
  • VFD Fault and Alarm Monitoring
  • Industrial Electrical Safety
  • Lockout/Tagout (LOTO) Fundamentals
  • Earthing and Insulation Testing

Practical exercises

  • Configure overload protection.
  • Identify common VFD fault codes.
  • Demonstrate emergency stop operation.
  • Perform basic motor insulation testing under supervision.
TOPIC 08Industrial Motor Control Wiring4 HOURS

Topic 8: Industrial Motor Control Wiring (4 Hours)

  • Introduction to Industrial Control Wiring
  • Electrical Power Circuit Wiring
  • Motor Control Circuit Wiring
  • Electrical Wiring Symbols
  • Control Panel Layout
  • Contactor and Relay Wiring
  • Push Button and Selector Switch Wiring
  • Limit Switch Interfacing
  • Forward and Reverse Control Wiring
  • VFD Control Terminal Wiring
  • Analog Input Wiring (0–10V and 4–20mA)
  • Digital Input and Output Wiring
  • Shielded Cable and Earthing Practices
  • Cable Identification and Ferruling
  • Electrical Panel Testing
  • Wiring Documentation

Practical exercises

  • Prepare a motor control wiring diagram.
  • Wire a VFD control circuit.
  • Configure external start-stop commands.
  • Test analog speed reference wiring.
TOPIC 09PLC and VFD Integration4 HOURS

Topic 9: PLC and VFD Integration (4 Hours)

  • Introduction to PLC-Based Motor Control
  • PLC and VFD Communication Architecture
  • Digital I/O-Based VFD Control
  • PLC Start and Stop Commands
  • Forward and Reverse Commands
  • PLC-Based Speed Reference
  • Analog Output-Based Frequency Control
  • 0–10V and 4–20mA Integration
  • VFD Status and Fault Feedback
  • PLC Interlocking and Permissive Logic
  • Modbus RTU Communication
  • Modbus TCP Fundamentals
  • PLC-VFD Parameter and Register Mapping
  • Motor Status Monitoring
  • Automated Motor Control Applications

Practical exercises

  • Connect PLC with VFD using digital I/O.
  • Control motor speed through PLC analog output.
  • Implement PLC-based forward and reverse control.
  • Read VFD status and fault information.
TOPIC 10Industrial Troubleshooting & Practical Assessment4 HOURS

Topic 10: Industrial Troubleshooting & Practical Assessment (4 Hours)

  • Introduction to Industrial Motor Troubleshooting
  • Motor Not Starting Problems
  • Excessive Motor Current
  • Motor Overheating
  • Abnormal Vibration and Noise
  • Motor Direction Problems
  • VFD Overcurrent and Overvoltage Faults
  • Undervoltage and Overload Faults
  • Communication Failures
  • Motor and Drive Parameter Errors
  • Electrical Wiring Fault Identification
  • Preventive Maintenance
  • Motor Performance Monitoring
  • VFD Maintenance Procedures
  • Industrial Commissioning Checklist
  • Final Practical Assessment and Viva

Practical exercises

  • Diagnose a motor starting fault.
  • Identify a VFD trip condition.
  • Troubleshoot control wiring.
  • Perform a complete motor and VFD operational test.

DRIVES AND MOTOR BEHAVIOR / PROJECT WORKFLOW

Follow the decisions.
Explain the result.

Scroll to follow the journey. On a smaller screen, swipe the cards or use your keyboard.

01 / DEFINE

Read the equipment limits

Identify the motor and drive documentation before proposing settings.

02 / DEVELOP

Plan the speed profile

Describe the command, ramp and stop conditions in simulation.

03 / TEST

Inspect the response

Compare simulated behavior with the intended operating envelope.

04 / REVIEW

Document the checks

Present fault observations and questions requiring qualified review.

DRIVES AND MOTOR BEHAVIOR / INTERACTIVE CONCEPT

Inspect the layers.
Trace the dependencies.

Separate a conceptual motor housing, rotor and shaft to discuss mechanical rotation and the drive's role. This model does not simulate electromagnetic behavior, load torque or safe isolation.

This illustrative 3D model is not a hardware specification, a functional simulation, a fabrication file or equipment promised with enrolment.

  • Read motor fundamentals Compare motor types and relate the training scenario to three-phase and induction-motor concepts.
  • Explain drive parameters Connect frequency, acceleration and protection settings with the manufacturer's documented limits.
  • Troubleshoot systematically Use simulated states or supervised measurements to distinguish a command issue from a drive or motor fault.
Understand. Apply. Verify.

Separate a conceptual motor housing, rotor and shaft to discuss mechanical rotation and the drive's role. This model does not simulate electromagnetic behavior, load torque or safe isolation. Interactive rotation and layer separation require JavaScript and WebGL.

Drag to rotate. On desktop, scroll to separate the layers, or use the controls.

05 / TOOLS & RESPONSIBLE PRACTICE

Know the setup.
Respect its limits.

Suggested learning environment

Suggested setup: motor/drive simulation software, manufacturer motor and VFD documentation, wiring diagrams and approved isolated training equipment. Physical demonstrations may use a compatible PLC, VFD and guarded motor trainer, rated measurement instruments, phase-sequence and insulation test instruments under qualified supervision. Equipment, licences, supported control modes and lab access must be confirmed.

Confirm hardware, software versions, licences, consumables, fabrication and lab access before enrolment. No personal kit or software licence is promised.

Course-specific boundaries

Use simulation or approved trainers under qualified supervision. No unsupervised mains, three-phase measurements, starter/VFD wiring, insulation testing or commissioning is authorized. Drive capacitors retain hazardous energy; follow manufacturer isolation, discharge verification and lockout/tagout procedures with qualified personnel. Guard rotating machinery and use correctly rated equipment. Verify motor/drive ratings, I/O levels and signal compatibility. Classroom interlocks and emergency-stop examples are not certified protective functions; do not alter or operate production equipment.

06 / BEFORE YOU JOIN

Course FAQs

What does VFD & Motor Control Systems cover?

Explore AC/DC motors, three-phase systems, induction motor characteristics and starter methods. Configure VFD concepts, speed and torque references, protection and control interfaces, integrate PLC commands and feedback, and troubleshoot motor/drive scenarios with final practical assessment and viva.

What should I know before joining?

Suggested preparation: electrical fundamentals, motor concepts and control wiring. Live three-phase work requires qualified supervision.

What practical work could I discuss?

Interpret motor nameplates and three-phase concepts, explain induction motor characteristics and starters, configure VFD parameters and speed/torque references, review protection and wiring, integrate PLC commands and fault feedback, and diagnose training scenarios with final practical assessment and viva. The application studio shows selected briefs or stages.

How long does this course take?

The suggested curriculum is 45 hours. Confirm session frequency, batch dates and any independent practice time before booking.

Are tools included, and is the course online or offline?

Suggested setup: motor/drive simulation software, manufacturer motor and VFD documentation, wiring diagrams and approved isolated training equipment. Physical demonstrations may use a compatible PLC, VFD and guarded motor trainer, rated measurement instruments, phase-sequence and insulation test instruments under qualified supervision. Equipment, licences, supported control modes and lab access must be confirmed. Equipment, licences, fees, delivery mode and lab access must be confirmed for each batch.

Can I enrol now?

Request counselling to confirm prerequisites, course availability and scheduling. An enquiry is not a confirmed booking.

START WITH A COURSE CONVERSATION

VFD & Motor Control Systems.
Plan your next practical step.

Share your current experience and project goals. Confirm readiness, availability, fees, tools and class arrangements with TECHNOVA.

Request course counselling

THE COURSE JOURNAL

A useful idea.
A deeper perspective.

VFD Learning: Understand Settings Before Motion

Explore the relationship between motor data, drive parameters and supervised testing, with clear boundaries between educational simulation and live motor work.

Read the course article