CAD TO PROTOTYPE / UNDERSTAND. APPLY. VERIFY.

CAD TO PROTOTYPE / ENGINEERING LEARNING

CAD & Prototyping

Draw precisely. Build carefully. Revise with evidence.

Suggested duration: 90 hours.

Connect precise CAD drawings and parametric parts with prototype planning, slicing, supervised fabrication and measured iteration. Explore materials, tolerances, assemblies and manufacturing documentation, then present a tested prototype or a validated fabrication plan. This suggested 90-hour curriculum is proposed for counselling and confirmed with each batch.

The curriculum is suggested and subject to batch confirmation. Starting level, batch dates, software and equipment are confirmed through counselling. See fees and batch timings below. An enquiry is not a confirmed booking.

A dimensioned drawing connects to a conceptual printer depositing a model layer, followed by a measurement reference for prototype iteration. This is a conceptual animation, not a functional simulation or wiring guide. THE CAD TO PROTOTYPE WORKSHOP DRAWING / FIT LAYER / ORIENTATION / REVISION DRAWFABRICATEMEASURE

PLAN AHEAD

Clear fees.
Flexible batches.

Course fee / 90 hours₹16,999 + 18% tax

Total including tax₹20,058.82

Batch options

Regular, weekend and Sunday batches available. Monday–Saturday: preferred slots 9am–6pm; Sunday: 10am–1pm (IST). Slots, dates and places require availability confirmation.

Fees exclude 18% tax; totals include tax. Confirm material, licence and take-home kit charges before enrolment. Enquiry is not a reservation.

Learning pathway
CAD to prototype
Suggested duration
90 hours
Curriculum
12 topics / modules
Availability
Confirm by enquiry

CAD & PROTOTYPING / AT A GLANCE

A clear learning scope.
Practical work with context.

12

Curriculum topics / modules

Explore the supplied cad to prototype learning sequence.

90

Suggested learning hours

Session frequency and calendar duration are confirmed by enquiry.

3

Integrated project stages

Three stages support one integrated design project within the suggested 90 hours.

01 / COURSE PERSPECTIVE

Understand the system.
Draw precisely. Build carefully. Revise with evidence.

Starting point

Basic computer use and arithmetic. Prior CAD or printer experience is not assumed; confirm design goals and safe supervised fabrication access with a mentor.

Discuss preparation and readiness with a mentor before choosing a batch. These are recommended starting points, not a guarantee of placement.

Evidence of learning

Prepare drawings and parametric parts, specify fits and materials, export manufacturing files, plan slicing and supervised prototyping, measure discrepancies and document an evidence-based design revision.

Project scope depends on supervision, equipment and practice. Examples describe learning activities, not verified student work or guaranteed outcomes.

Choose the related pathway: 3D Modelling. Each course has its own suggested 90-hour curriculum.

02 / WHAT YOU WILL WORK ON

Build understanding.
Make your choices explainable.

Communicate dimensions

Create precise drafting and parametric CAD with clear tolerances and revision records.

Plan fabrication

Relate materials, orientation, supports and joining choices to the selected process.

Validate and iterate

Compare measured results with acceptance criteria and document a bounded design revision.

03 / CURRICULUM & PRACTICE

Complete suggested curriculum.
90 hours of CAD & prototyping.

This is a proposed, suggested curriculum, not a confirmed batch syllabus. Twelve topics total 90 hours, including practical exercises, a 14-hour integrated project and four hours for final review. A mentor confirms software, prerequisites, delivery, assessments and facilities before enrolment.

TOPIC 01Design Briefs, Measurement & Prototype Planning6 HOURS

Design Briefs, Measurement & Prototype Planning (6 Hours)

  • Functional requirements and constraints
  • Reference measurements and units
  • Sketches and design alternatives
  • Prototype purpose and test criteria
  • Risk, resources and fabrication boundaries

Suggested practical exercises

  • Write a bounded prototype brief
  • Measure a sample part
  • Define dimensional acceptance criteria
TOPIC 022D CAD Drafting Fundamentals8 HOURS

2D CAD Drafting Fundamentals (8 Hours)

  • AutoCAD or equivalent drafting workspace
  • Lines, circles, arcs and construction geometry
  • Object snaps and precise coordinates
  • Layers, line types and drawing organization
  • Trim, offset, mirror and pattern workflows

Suggested practical exercises

  • Draft a mounting plate
  • Organize a drawing with layers
  • Check geometry against reference dimensions
TOPIC 03Technical Drawings & Documentation10 HOURS

Technical Drawings & Documentation (10 Hours)

  • Orthographic, section and detail views
  • Dimensions, annotations and drawing scales
  • Tolerance notation fundamentals
  • Drawing layouts and plot settings
  • Revision blocks and drawing review

Suggested practical exercises

  • Create a dimensioned component sheet
  • Add a section and detail view
  • Export and inspect a drawing PDF
TOPIC 04Parametric CAD & Part Design8 HOURS

Parametric CAD & Part Design (8 Hours)

  • Constrained sketches and design intent
  • Extrude, revolve and feature history
  • Holes, patterns, shells and fillets
  • Parameters and editable dimensions
  • Part naming and version management

Suggested practical exercises

  • Model an adjustable bracket
  • Create an enclosure base
  • Revise a model through named parameters
TOPIC 05Assemblies, Fits & Tolerances8 HOURS

Assemblies, Fits & Tolerances (8 Hours)

  • Assembly hierarchy and constraints
  • Clearance and interference fits
  • Fasteners and joining concepts
  • Tolerance accumulation fundamentals
  • Exploded views and assembly records

Suggested practical exercises

  • Assemble a two-part enclosure
  • Check fastener and tool access
  • Plan a clearance-fit test coupon
TOPIC 06Materials & Design for Fabrication8 HOURS

Materials & Design for Fabrication (8 Hours)

  • Prototype material selection
  • FDM material characteristics
  • Wall thickness and feature limits
  • Orientation, anisotropy and support access
  • Design for assembly and revision

Suggested practical exercises

  • Compare materials for a training part
  • Revise unsupported features
  • Document manufacturing assumptions
TOPIC 073D Printing & Slicing Fundamentals6 HOURS

3D Printing & Slicing Fundamentals (6 Hours)

  • FDM printer components and workflow
  • STL/3MF export and scale checks
  • Layer height, walls and infill
  • Supports, adhesion and print orientation
  • Preview, estimated time and material use

Suggested practical exercises

  • Slice a sample bracket
  • Compare two orientation strategies
  • Inspect toolpath and support previews
TOPIC 08Supervised Fabrication & Post-Processing6 HOURS

Supervised Fabrication & Post-Processing (6 Hours)

  • Printer setup and supervised readiness checks
  • Hot surfaces, moving axes and material handling
  • First-layer and print-quality observation
  • Support removal and finishing concepts
  • Fabrication logs and failure documentation

Suggested practical exercises

  • Observe an approved supervised print or recorded demonstration
  • Review a print-quality sample
  • Prepare a safe finishing plan
TOPIC 09Prototype Testing & Measurement6 HOURS

Prototype Testing & Measurement (6 Hours)

  • Dimensional inspection and repeatability
  • Caliper measurements and uncertainty
  • Fit and assembly checks
  • Functional testing within safe limits
  • Acceptance records and defect classification

Suggested practical exercises

  • Measure a sample or supervised prototype
  • Compare observed dimensions with CAD
  • Record fit and functional test results
TOPIC 10Iteration, Costing & Manufacturing Handover6 HOURS

Iteration, Costing & Manufacturing Handover (6 Hours)

  • Root-cause analysis of prototype discrepancies
  • Parameter and geometry revisions
  • Material/time estimates and limitations
  • BOM and assembly documentation
  • Versioned export and fabrication packages

Suggested practical exercises

  • Revise a clearance after measurement
  • Prepare a prototype BOM
  • Package drawings, files and test evidence
TOPIC 11Integrated CAD-to-Prototype Project14 HOURS

Integrated CAD-to-Prototype Project (14 Hours)

  • Design brief and acceptance criteria
  • Detailed CAD and assembly development
  • Fabrication planning and supervised sample where available
  • Measurement-driven revision
  • Final documentation and design handover

Suggested practical exercises

  • Develop a bracket, enclosure or mechanism prototype plan
  • Fabricate only with confirmed supervised access or validate a digital plan
  • Document a test-driven revision
TOPIC 12Final Assessment & Prototype Presentation4 HOURS

Final Assessment & Prototype Presentation (4 Hours)

  • Drawing and model quality review
  • Manufacturing-file verification
  • Evidence-based prototype evaluation
  • Presentation and technical viva
  • Limitations and next-iteration plan

Suggested practical exercises

  • Present the prototype or validated fabrication plan
  • Explain dimensional findings and revisions
  • Demonstrate the final handover package

CAD TO PROTOTYPE / PROJECT WORKFLOW

Follow the decisions.
Explain the result.

Scroll to follow the journey. On a smaller screen, swipe the cards or use your keyboard.

01 / DEFINE

Set the acceptance criteria

Define function, dimensions and a safe test scope.

02 / DEVELOP

Create the CAD package

Prepare drawings, parts and an assembly review.

03 / TEST

Plan and inspect

Review slicing and supervised fabrication or a digital alternative.

04 / REVIEW

Revise with evidence

Document measurements, discrepancies and next steps.

CAD TO PROTOTYPE / INTERACTIVE CONCEPT

Inspect the layers.
Trace the dependencies.

Inspect conceptual prototype layers to discuss assembly and fit. This interactive model is not a slicer, a fabrication file or a verified printed part.

This illustrative 3D model is not a hardware specification, a functional simulation, a fabrication file or equipment promised with enrolment.

  • Communicate dimensions Create precise drafting and parametric CAD with clear tolerances and revision records.
  • Plan fabrication Relate materials, orientation, supports and joining choices to the selected process.
  • Validate and iterate Compare measured results with acceptance criteria and document a bounded design revision.
Understand. Apply. Verify.

Inspect conceptual prototype layers to discuss assembly and fit. This interactive model is not a slicer, a fabrication file or a verified printed part. Interactive rotation and layer separation require JavaScript and WebGL.

Drag to rotate. On desktop, scroll to separate the layers, or use the controls.

05 / TOOLS & RESPONSIBLE PRACTICE

Know the setup.
Respect its limits.

Suggested learning environment

Suggested tools: AutoCAD for drafting, Fusion or equivalent parametric CAD, a supported slicer, measuring tools and supervised fabrication equipment where available. Confirm licences, printer/material availability, consumables, workstation requirements and lab access; physical prints and personal kits are not automatically included.

Confirm hardware, software versions, licences, consumables, fabrication and lab access before enrolment. No personal kit or software licence is promised.

Course-specific boundaries

Printer hot surfaces, moving axes, fumes and finishing tools require appropriate supervision and manufacturer guidance. Fabricate only with confirmed facilities and suitable materials. Prototypes are not certified structural, medical or safety-critical parts; no included printing, materials or successful fabrication is promised.

06 / BEFORE YOU JOIN

Course FAQs

What does CAD & Prototyping cover?

Connect precise CAD drawings and parametric parts with prototype planning, slicing, supervised fabrication and measured iteration. Explore materials, tolerances, assemblies and manufacturing documentation, then present a tested prototype or a validated fabrication plan. This suggested 90-hour curriculum is proposed for counselling and confirmed with each batch.

What should I know before joining?

Basic computer use and arithmetic. Prior CAD or printer experience is not assumed; confirm design goals and safe supervised fabrication access with a mentor.

What practical work could I discuss?

Prepare drawings and parametric parts, specify fits and materials, export manufacturing files, plan slicing and supervised prototyping, measure discrepancies and document an evidence-based design revision. The application studio shows selected briefs or stages.

How long does this course take?

The suggested curriculum is 90 hours. Confirm session frequency, batch dates and any independent practice time before booking.

Are tools included, and is the course online or offline?

Suggested tools: AutoCAD for drafting, Fusion or equivalent parametric CAD, a supported slicer, measuring tools and supervised fabrication equipment where available. Confirm licences, printer/material availability, consumables, workstation requirements and lab access; physical prints and personal kits are not automatically included. Equipment, licences, fees, delivery mode and lab access must be confirmed for each batch.

Can I enrol now?

Request counselling to confirm prerequisites, course availability and scheduling. An enquiry is not a confirmed booking.

START WITH A COURSE CONVERSATION

CAD & Prototyping.
Plan your next practical step.

Share your current experience and project goals. Confirm readiness, availability, fees, tools and class arrangements with TECHNOVA.

Request course counselling

THE COURSE JOURNAL

A useful idea.
A deeper perspective.

CAD Prototyping: Fit Is a Test, Not a Render

Explore the path from measured requirements to a physical fit check, including clearances, assembly access, fabrication assumptions and prototype revisions.

Read the course article