ELECTRONICS DESIGN AND PROTOTYPING / UNDERSTAND. APPLY. VERIFY.

ELECTRONICS DESIGN AND PROTOTYPING / ENGINEERING LEARNING

PCB Design & Electronics Prototyping

Turn a circuit idea into a reviewable board design.

Suggested duration: 60 hours.

Develop electronic circuits from fundamentals and schematic capture through component selection, PCB layers, layout and routing, design checks and Gerber generation. Explore manufacturing, supervised assembly and soldering, then test, debug and document a final electronics prototype.

Starting level, batch dates, software and equipment are confirmed through counselling. See fees and batch timings below. An enquiry is not a confirmed booking.

A schematic becomes a concept PCB layout with progressively illuminated copper routes and a separate design-check panel. This is a conceptual animation, not a functional simulation or wiring guide. THE SCHEMATIC-TO-LAYOUT STUDIO SCHEMATIC ERC / DRCPLACEMENT / FOOTPRINTS / ROUTING CAPTUREROUTEREVIEW

PLAN AHEAD

Clear fees.
Flexible batches.

Course fee / 60 hours₹11,999 + 18% tax

Total including tax₹14,158.82

Batch options

Regular, weekend and Sunday batches available. Monday–Saturday: preferred slots 9am–6pm; Sunday: 10am–1pm (IST). Slots, dates and places require availability confirmation.

Fees exclude 18% tax; totals include tax. Confirm material, licence and take-home kit charges before enrolment. Enquiry is not a reservation.

Learning pathway
Electronics design and prototyping
Suggested duration
60 hours
Curriculum
11 topics / modules
Availability
Confirm by enquiry

PCB DESIGN & ELECTRONICS PROTOTYPING / AT A GLANCE

A clear learning scope.
Practical work with context.

11

Detailed curriculum topics

Explore the supplied electronics design and prototyping learning sequence.

60

Suggested learning hours

Session frequency and calendar duration are confirmed by enquiry.

3

Prototype development stages

Schematic, layout and fabrication/test documentation connect the topic exercises with the final prototype.

01 / COURSE PERSPECTIVE

Understand the system.
Turn a circuit idea into a reviewable board design.

Starting point

Suggested preparation: circuit fundamentals, component identification and basic schematic reading.

Discuss preparation and readiness with a mentor before choosing a batch. These are recommended starting points, not a guarantee of placement.

Evidence of learning

Design electronic circuits and schematics, select components and footprints, plan PCB layers, place and route a board, resolve ERC/DRC findings, verify Gerber and drill files, and document supervised assembly, circuit testing, debugging and a final prototype demonstration.

Project scope depends on supervision, equipment and practice. Examples describe learning activities, not verified student work or guaranteed outcomes.

02 / WHAT YOU WILL WORK ON

Build understanding.
Make your choices explainable.

Capture design intent

Connect schematic symbols, component selection and datasheets with a clear circuit purpose.

Plan the layout

Consider placement, routing, layers and design rules before producing manufacturing files.

Review before fabrication

Check footprints, connectivity and assembly assumptions, then document test points and revisions.

03 / CURRICULUM & PRACTICE

Complete topic-wise syllabus.
60 hours from circuit to prototype.

Eleven topics total 60 hours. Practical exercises are included within their topic allocations, not additional hours. The final five hours cover circuit testing, debugging, prototype demonstration and project evaluation. Manufacturing processes are studied conceptually; fabrication and assembly depend on supervised facilities.

TOPIC 01Electronic Circuit Fundamentals5 HOURS

Topic 1: Electronic Circuit Fundamentals (5 Hours)

  • Introduction to Electronics and Circuit Design
  • Basic Electrical Concepts: Voltage, Current, Resistance and Power
  • Ohm's Law and Kirchhoff's Laws
  • AC and DC Circuit Fundamentals
  • Series and Parallel Circuit Connections
  • Passive Electronic Components
  • Resistors
  • Capacitors
  • Inductors
  • Active Electronic Components
  • Diodes
  • Transistors
  • MOSFETs
  • Integrated Circuits
  • Semiconductor Fundamentals
  • Analog and Digital Electronic Circuits
  • Basic Logic Gates and Digital Circuits
  • Power Supply and Voltage Regulation
  • Circuit Symbols and Electronic Datasheets
  • Breadboard Circuit Construction

Practical exercises

  • LED and resistor circuit design
  • Series and parallel circuit construction
  • Diode and transistor switching circuits
  • Basic regulated DC power supply
TOPIC 02Schematic Capture6 HOURS

Topic 2: Schematic Capture (6 Hours)

  • Introduction to Electronic Schematic Design
  • Understanding Circuit Diagrams
  • Electronic Symbols and Standards
  • Schematic Design Software Introduction
  • Creating New Schematic Projects
  • Component Library Management
  • Placing and Connecting Components
  • Net Labels and Power Symbols
  • Ground and Power Supply Connections
  • Hierarchical Schematic Design
  • Component Reference Designators
  • Electrical Rules Checking
  • Multi-Sheet Schematic Design
  • Schematic Documentation and Export
  • Converting Schematic Designs into PCB Layouts

Practical exercises

  • LED driver schematic
  • Power supply schematic
  • Sensor interface circuit
  • Microcontroller-based schematic
TOPIC 03Component Selection5 HOURS

Topic 3: Component Selection (5 Hours)

  • Introduction to Electronic Component Selection
  • Understanding Electronic Component Specifications
  • Resistor Values and Tolerance
  • Capacitor Types and Voltage Ratings
  • Diode and Transistor Selection
  • MOSFET Selection and Switching Characteristics
  • Integrated Circuit Selection
  • Microcontroller and Sensor Selection
  • Voltage Regulator Selection
  • Connector and Terminal Selection
  • Surface Mount Device (SMD) Components
  • Through-Hole Technology (THT)
  • SMD vs Through-Hole Components
  • Component Packages and Footprints
  • Datasheet Interpretation
  • Component Availability and Cost Optimization
  • Bill of Materials (BOM) Preparation

Practical exercises

  • Select components for a 5V power supply
  • Compare SMD and THT components
  • Prepare a component BOM for an embedded circuit
TOPIC 04PCB Design Principles6 HOURS

Topic 4: PCB Design Principles (6 Hours)

  • Introduction to Printed Circuit Boards
  • PCB Structure and Construction
  • PCB Materials and Substrates
  • FR-4 Material Fundamentals
  • Copper Cladding and Thickness
  • PCB Layers and Stack-Up
  • Copper Tracks, Pads and Vias
  • Through-Hole and Surface Mount Pads
  • Solder Mask and Silkscreen
  • PCB Board Dimensions and Shapes
  • PCB Thickness and Mechanical Constraints
  • Electrical Clearance and Creepage Fundamentals
  • Track Width and Current Carrying Capacity
  • Thermal Management Fundamentals
  • EMI and EMC Design Introduction
  • PCB Design Standards and Best Practices
TOPIC 05Single-Layer, Double-Layer & Multilayer PCB Concepts5 HOURS

Topic 5: Single-Layer, Double-Layer & Multilayer PCB Concepts (5 Hours)

  • Introduction to Single-Layer PCBs
  • Single-Sided PCB Construction
  • Double-Layer PCB Architecture
  • Top and Bottom Copper Layers
  • Multilayer PCB Fundamentals
  • Four-Layer and Six-Layer PCB Concepts
  • PCB Stack-Up Design
  • Ground and Power Planes
  • Signal Layer Configuration
  • Vias and Interlayer Connections
  • Blind and Buried Via Concepts
  • Thermal and Electrical Considerations
  • Advantages and Limitations of Different PCB Types
  • PCB Type Selection Based on Applications

Practical exercises

  • Design a single-layer LED circuit PCB
  • Design a double-layer sensor interface PCB
  • Create a basic four-layer stack-up
TOPIC 06PCB Layout & Routing8 HOURS

Topic 6: PCB Layout & Routing (8 Hours)

  • Introduction to PCB Layout Design
  • Importing Schematic into PCB Editor
  • Component Placement Techniques
  • PCB Board Outline Creation
  • Component Orientation and Spacing
  • Footprint Assignment and Verification
  • Manual and Interactive Routing
  • Track Width and Clearance Configuration
  • Copper Pour and Ground Plane Creation
  • Via Placement and Management
  • Power and Ground Routing
  • Differential Pair Routing Fundamentals
  • High-Speed Signal Routing Introduction
  • Thermal Relief and Copper Management
  • PCB Layer Management
  • Silkscreen and Component Labeling
  • Design for Manufacturability (DFM)
  • PCB Layout Optimization
  • Final PCB Layout Review

Practical exercises

  • Create a two-layer PCB layout
  • Route a microcontroller development circuit
  • Design a sensor interface board
  • Optimize component placement and routing
TOPIC 07Design Rule Checking5 HOURS

Topic 7: Design Rule Checking (5 Hours)

  • Introduction to PCB Design Rule Checking (DRC)
  • Electrical Rule Checking (ERC)
  • Clearance and Spacing Verification
  • Track Width Validation
  • Via and Pad Clearance
  • Unconnected Net Identification
  • Copper Pour and Ground Plane Validation
  • Silkscreen Clearance Checking
  • Board Edge and Mechanical Clearance
  • Footprint and Component Verification
  • Manufacturing Design Rules
  • DFM and DFT Fundamentals
  • PCB Design Error Identification
  • DRC Report Generation
  • PCB Design Review and Approval

Practical exercises

  • Run ERC and DRC checks
  • Identify and correct PCB layout errors
  • Prepare a final design validation report
TOPIC 08Gerber File Generation4 HOURS

Topic 8: Gerber File Generation (4 Hours)

  • Introduction to Gerber Manufacturing Files
  • Understanding Gerber File Formats
  • RS-274X Gerber Fundamentals
  • Copper Layer File Generation
  • Solder Mask File Generation
  • Silkscreen File Generation
  • Board Outline and Mechanical Layers
  • NC Drill File Generation
  • Drill Tool Configuration
  • BOM and Pick-and-Place File Generation
  • Gerber Export Configuration
  • Gerber File Verification
  • Introduction to Gerber Viewer Tools
  • Manufacturing Documentation Preparation

Practical exercises

  • Generate complete Gerber files
  • Export NC Drill files
  • Verify manufacturing files using a Gerber viewer
  • Prepare PCB fabrication documentation
TOPIC 09PCB Manufacturing Process5 HOURS

Topic 9: PCB Manufacturing Process (5 Hours)

  • Introduction to PCB Manufacturing
  • PCB Fabrication Workflow
  • Raw PCB Material Selection
  • Copper Cladding Process
  • Photolithography Fundamentals
  • Copper Etching Process
  • Drilling and Hole Plating
  • Multilayer Lamination
  • Solder Mask Application
  • Silkscreen Printing
  • Surface Finish Options
  • HASL
  • Lead-Free HASL
  • ENIG
  • OSP
  • PCB Cutting and Routing
  • Electrical Testing and Inspection
  • PCB Quality Control
  • Introduction to PCB Manufacturing Services
  • Cost Estimation and Fabrication Specifications
TOPIC 10Component Assembly & Soldering6 HOURS

Topic 10: Component Assembly & Soldering (6 Hours)

  • Introduction to PCB Assembly
  • Through-Hole Component Assembly
  • Surface Mount Technology (SMT)
  • Component Placement and Orientation
  • Soldering Tools and Equipment
  • Soldering Iron Operation
  • Through-Hole Hand Soldering
  • SMD Hand Soldering
  • Hot Air Rework Techniques
  • Solder Paste Application
  • Soldering Temperature Control
  • Solder Joint Inspection
  • Common Soldering Defects
  • Desoldering and Component Replacement
  • Introduction to Reflow Soldering
  • PCB Cleaning and Assembly Inspection
  • ESD Safety and Handling Procedures

Practical exercises

  • Assemble a through-hole PCB
  • Solder SMD resistors and capacitors
  • Replace and rework damaged components
  • Inspect solder joints using magnification
TOPIC 11Circuit Testing, Debugging & Final Project5 HOURS

Topic 11: Circuit Testing, Debugging & Final Project (5 Hours)

  • Introduction to PCB Testing and Validation
  • Power Supply and Continuity Testing
  • Digital Multimeter Applications
  • Oscilloscope Fundamentals
  • Logic Analyzer Introduction
  • Voltage and Current Measurements
  • Short Circuit and Open Circuit Identification
  • Component-Level Troubleshooting
  • Signal Tracing and Fault Diagnosis
  • Microcontroller Programming and Firmware Testing
  • PCB Functional Testing
  • Hardware Debugging Techniques
  • Performance and Reliability Testing
  • Final Prototype Demonstration
  • Technical Documentation and Project Evaluation

ELECTRONICS DESIGN AND PROTOTYPING / PROJECT WORKFLOW

Follow the decisions.
Explain the result.

Scroll to follow the journey. On a smaller screen, swipe the cards or use your keyboard.

01 / DEFINE

Define the circuit

Identify interfaces, power constraints and required components.

02 / DEVELOP

Capture the schematic

Check connectivity, symbols and selected footprints.

03 / TEST

Route and review

Compare layout decisions with design rules and assembly access.

04 / REVIEW

Document the board

Present manufacturing outputs and a bounded validation plan.

ELECTRONICS DESIGN AND PROTOTYPING / INTERACTIVE CONCEPT

Inspect the layers.
Trace the dependencies.

Separate a conceptual board, component layer and enclosure to examine placement, clearance and assembly access. This visualization is not a routed PCB, fabrication file or validated circuit.

This illustrative 3D model is not a hardware specification, a functional simulation, a fabrication file or equipment promised with enrolment.

  • Capture design intent Connect schematic symbols, component selection and datasheets with a clear circuit purpose.
  • Plan the layout Consider placement, routing, layers and design rules before producing manufacturing files.
  • Review before fabrication Check footprints, connectivity and assembly assumptions, then document test points and revisions.
Understand. Apply. Verify.

Separate a conceptual board, component layer and enclosure to examine placement, clearance and assembly access. This visualization is not a routed PCB, fabrication file or validated circuit. Interactive rotation and layer separation require JavaScript and WebGL.

Drag to rotate. On desktop, scroll to separate the layers, or use the controls.

05 / TOOLS & RESPONSIBLE PRACTICE

Know the setup.
Respect its limits.

Suggested learning environment

Suggested setup: KiCad or equivalent schematic/PCB software, component libraries and datasheets, a Gerber viewer, breadboard components, a protected low-voltage supply and multimeter. Soldering, rework, magnification, ESD protection, oscilloscope and logic analyzer access depend on supervised facilities; fabrication and software licences must be confirmed.

Confirm hardware, software versions, licences, consumables, fabrication and lab access before enrolment. No personal kit or software licence is promised.

Course-specific boundaries

Use protected low-voltage circuits; no mains supply construction or live mains testing is authorized. Soldering, hot-air rework and powered testing require qualified supervision, ventilation, ESD precautions and appropriate equipment. Manufacturing and etching processes are studied conceptually, not as unsupervised chemical activities. A design-rule pass does not certify electrical safety or production readiness.

06 / BEFORE YOU JOIN

Course FAQs

What does PCB Design & Electronics Prototyping cover?

Develop electronic circuits from fundamentals and schematic capture through component selection, PCB layers, layout and routing, design checks and Gerber generation. Explore manufacturing, supervised assembly and soldering, then test, debug and document a final electronics prototype.

What should I know before joining?

Suggested preparation: circuit fundamentals, component identification and basic schematic reading.

What practical work could I discuss?

Design electronic circuits and schematics, select components and footprints, plan PCB layers, place and route a board, resolve ERC/DRC findings, verify Gerber and drill files, and document supervised assembly, circuit testing, debugging and a final prototype demonstration. The application studio shows selected briefs or stages.

How long does this course take?

The suggested curriculum is 60 hours. Confirm session frequency, batch dates and any independent practice time before booking.

Are tools included, and is the course online or offline?

Suggested setup: KiCad or equivalent schematic/PCB software, component libraries and datasheets, a Gerber viewer, breadboard components, a protected low-voltage supply and multimeter. Soldering, rework, magnification, ESD protection, oscilloscope and logic analyzer access depend on supervised facilities; fabrication and software licences must be confirmed. Equipment, licences, fees, delivery mode and lab access must be confirmed for each batch.

Can I enrol now?

Request counselling to confirm prerequisites, course availability and scheduling. An enquiry is not a confirmed booking.

START WITH A COURSE CONVERSATION

PCB Design & Electronics Prototyping.
Plan your next practical step.

Share your current experience and project goals. Confirm readiness, availability, fees, tools and class arrangements with TECHNOVA.

Request course counselling

THE COURSE JOURNAL

A useful idea.
A deeper perspective.

PCB Design: From Schematic to Testable Board

Follow the decisions that connect a schematic to a practical PCB: component footprints, design-rule checks, manufacturing outputs and prototype test access.

Read the course article